DX380LC-7
Displaying Outlines of the Vehicle Area
Guidelines are displayed around the contour of the machine in
order for the operator to be able to gauge distances around the
machine while operating the machine.
•
A guideline (red) of 1.6 m distant is displayed around the
front/rear/left/right contour of the machine.
NOTE:
The vehicle contour is displayed in top view,
rear + corner view, and 3D view.
NOTE:
The vehicle guidelines can be turned on and off
in the user menu.
How to access: User Menu
→
Machine Configuration
→
AVM Setting
NOTE:
In the event that the around view monitoring
(AVM) system does not work properly, be sure
to contact a Doosan service center for
inspection and maintenance.
EX1503206
DOOSAN
1
Top View
Top View
Top View
Figure 151
DS1900337
Figure 152
WARNING
AVOID DEATH OR SERIOUS INJURY
A camera with a wide-angle lens is installed in order to
provide a wider field of vision. Hence, there may be a
difference between the distance shown on the screen
and the actual distance. For the sake of safety, be sure
to check the front/rear/left/right views directly.
WARNING
AVOID DEATH OR SERIOUS INJURY
The field of vision on the AVM screen may be restricted if
a door on the machine is open.
Be sure to close all doors before using AVM.