DX380LC-7
Operating Range and Display
NOTE:
In the case of wheel-type machines, the ultrasonic
sensor stops working automatically at speeds of 10
km/h or higher.
NOTE:
The display icon is only shown when objects are
detected near each sensor.
NOTE:
The display icon and alarm may appear differently if
an obstacle is located between sensors or very close
to the excavator, or depending on the surrounding
conditions of the machine.
NOTE:
The display icon shown above may differ from the
actual display icon in the machine.
NOTE:
Pushing the DMB/buzzer stop switch can stop the
alarm temporarily.
Sensor Non-Activation Conditions
1.
In cases where a sensor may not operate normally
•
When a sensor is frozen
•
When foreign matter such as snow or condensation
is blocking the surface of a sensor
2.
In cases where a sensor may malfunction
•
When driving on bumpy roads, gravel roads, hills,
and in forests
•
When the machine is near an object which generates
ultrasonic waves, such as the engine noise of
another nearby machine or the air brakes of a truck
•
In heavy rain or snowstorms
Level
Distance
Display Icon
Alarm
Warning on Edge of
Monitor
Level 1 warning
(green)
Long range
100 ms ON,
700 ms OFF
Green flashing
Level 2 warning
(yellow)
Medium distance
100 ms ON,
200 ms OFF
Yellow flashing
Level 3 warning
(red)
Short distance
Sounds continuously
Red flashing
WE1501120
Figure 156
Image of warning on edge of
monitor
