2-75
DX380LC-7
D.
Used to direct airflow to the front window and to
operator's feet.
5.
Air Inlet Selector Button
This button is used to select fresh air from outside the
cabin, or recirculate air within the cabin.
Pressing this switch enables the choice between fresh air
and recirculating air within the operator's cabin. The select
mode is displayed on the LCD.
•
Outside air introduction: When wishing to ventilate
internal air. When wishing to remove moisture
condensed on the glass window.
(winter/rainy season)
•
Internal air circulation: In the event that the interior
needs to be warmed up or cooled down quickly. In
the event of internal air circulation, the symbol shown
on the right of the display will light up.
NOTE:
Press the internal/outside air selection
button for three seconds to display the
outside air temperature.
6.
Fan Speed Selector Buttons
These buttons are used to control the speed of the blower
fan. Momentarily, pressing a button, changes the speed
one stage.
Continuously pressing and holding a button, repeatedly
changes the speed.
7.
Air Conditioner Button
This button is used to turn the air conditioner "ON" or
"OFF". When this function is activated, an "A/C" is
displayed in the upper left corner of the LCD.
8.
Defroster Button
Used to direct airflow to front window.
9.
LCD Display
This display shows the current setting.
DS1901157
Figure 162
DS2100104
Figure 163