Inspection, Maintenance and Adjustment
4-51
DX380LC-7
Air-conditioning Outer Filter - Clean
The machine is equipped with an air filtration system which
filters out dirt and dust particles from air being circulated into
operator's cabin. This filter must be cleaned out.
NOTE:
If the unit is being operated in a dusty environment,
the cleaning and replacement must be performed
more frequently. If filter is damaged, replace
damaged filter with a new one.
NOTE:
All right and left call outs are based on the operator
being seated in the operator's seat facing the front.
1.
Open the cover by using the starter KEY in the left side of
the cabin.
2.
Remove filter (Figure 55) and inspect for any damage.
3.
Use compressed air to clean filter. If filter is still dirty, then
replace filter
4.
Reassemble in reverse order.
WARNING
AVOID DEATH OR SERIOUS INJURY
If using compressed air to clean the element, make sure
that proper eye protection is worn.
DS1900867
Figure 54
DS1900868
Figure 55
