2-87
DX380LC-7
Miscellaneous Convenience
Devices
Ceiling Cover
NOTE:
If machine is equipped with an optional transparent
ceiling cover, never use any chemical cleaners on its
surface. Only use warm water to wash dust and dirt
from its surfaces and dry it with a soft fabric towel.
Opening Ceiling Cover
1.
Lower bucket or work tool to ground.
2.
Move safety lever to "LOCK" position.
3.
Pull lock (1, Figure 180) in front center of ceiling cover and
push it up with handle.
Closing Ceiling Cover
1.
Lower bucket or work tool to ground.
2.
Move safety lever to "LOCK" position.
3.
Pull down cover with handle (Figure 180) so lock (1, Figure
180) can be locked into bracket in ceiling frame.
Front Windows
Front Upper Window
The front upper window can be housed in cabin's ceiling.
DS1901104
1
Figure 180
WARNING
AVOID DEATH OR SERIOUS INJURY
When leaving operator's seat, move safety lever to "LOCK"
position and stop engine to prevent accidental activation of
the work levers and controls.