3-29
DX380LC-7
Work Levers (Joysticks) (BHL Pattern)
Left-hand Work Lever (Joystick) (Figure 33 and Figure 37)
1.
Boom down
2.
Boom up
3.
Left swing
4.
Right swing
NOTE:
The swing brake is spring applied and hydraulically
released. It is always engaged when the work lever
(joystick) is in "NEUTRAL" or the engine is stopped.
Right-hand Work Lever (Joystick) (Figure 33 and Figure 38)
5.
Arm dump
6.
Arm crowd
7.
Bucket crowd
8.
Bucket dump
NOTE:
Even after stopping the engine, the front can be
lowered to the ground by the operating work lever
(joystick) by moving safety lever to "UNLOCK"
position and turning starter switch "ON".
NOTE:
When operating the arm, it may stop momentarily.
When the arm is operated, the weight of the arm can
cause it to move faster than the amount of oil being
supplied.
DS1701782
1
2
4
3
Figure 37
DS1701783
6
5
7
8
Figure 38
EX1300702
Figure 39
