1-63
DX380LC-7
Lock Inspection Covers
When performing maintenance with inspection cover open, use
lock bar to secure cover and prevent accidental lowering of the
cover caused by wind or movement of the machine.
Working on Machine
When performing maintenance operations on machine, prevent
tripping and falling by keeping area around your feet clean and
free of objects and debris. Always do the following:
•
Do not spill oil or grease.
•
Do not leave tools laying around.
•
Watch your step when walking.
•
Never jump down from machine. When getting on or off
machine, use steps and handrails, and maintain a
three-point contact (both feet and one hand or both hands
and one foot) to support yourself.
•
If job requires it, wear protective clothing.
•
To prevent injury from slipping or falling, when working on
hood or covers, never stand or walk on areas except areas
equipped with nonslip pads.
•
If it is necessary to work under raised equipment or the
machine, support work equipment and machine securely
with blocks and stands strong enough to support weight of
work equipment and machine.
•
Do not work under the machine if track shoes are lifted off
ground and the machine is supported only with work
equipment. If any control levers are moved, or there is
damage to hydraulic system, work equipment or the
machine will suddenly drop causing death or serious injury.
ARO1
3
80L
Figure 53
