G80XW/XF, G115XW/XF, G150XW/XF, G200XW/XF - 50HZ
OPERATION & MAINTENANCE MANUAL
102
G100XW/XF, G135 XW/XF, G170XW/XF, G225XW/XF - 60Hz
Date/Time Setup Menu
Users can designate year, month, day, hour and minute for the controller and the designated time will be used to monitor
the system and manage fault messages.
Step 1)
press
Menu
button of the controller and then you can see
DRIVE UNIT MENU
. Use direction buttons to select
Date Time setup
menu.
Step 2)
Use
Up, Down, Left
and
Right
buttons to input year, month, day and hour and then press
Enter
button.
Alarm List Menu
This menu displays year, month, day, hour and minute for the errors in the controller and types of the faults in codes
which are used in troubleshooting.
Step 1)
press
Menu
button of the controller and then you can see
DRIVE UNIT MENU
. Use direction buttons to select
Alarm List
menu and then press
Enter
button.
Step 2)
Use
Up, Down, Left
and
Right
buttons in
ALARM LIST
menu to confirm the fault messages.
Default Setup Menu
When you cannot identify the type of the control engine by the controller, this menu offers the most common parameter
setting values.
Step 1)
Press
Menu
button of the controller and then you can see
DRIVE UNIT MENU
. Use
Up, Down, Left
and
Right
buttons to select
Default setup
menu and then press
Enter
button.
At this moment, the system message
"Initialization system setting?
" will appear.
Step 2)
Use
Left
and
Right
buttons to select either
YES
or
NO
in
System Message
and then press
Enter
button.
Default setup will change the configuration values of the engine to the default values. To initiate default setup, you need
to select
YES
and then press
Enter
button. Press
No
button if you don't want to.
