G80XW/XF, G115XW/XF, G150XW/XF, G200XW/XF - 50HZ
OPERATION & MAINTENANCE MANUAL
44
G100XW/XF, G135 XW/XF, G170XW/XF, G225XW/XF - 60Hz
GENERAL INFORMATION
This Operation and Maintenance Manual provides the
most efficient methods for engine maintenance as well as
quick, efficient methods to determine the cause of engine
faults to ensure that any actions taken by authorized
skilled technicians are done in the most efficient and effi-
cient way possible. If maintenance is performed by
unskilled technicians, or maintenance without the speci-
fied tools and facilities, serious bodily injury or critical
faults in engine performance may occur.
Regular inspection and maintenance are required to
maintain long-term optimal engine conditions and best
performance. In the event that a part must be replaced,
only genuine parts as defined by the parts list (PARTS
BOOK) should be used. Doosan shall not be held liable
for any critical damage or faults which may be caused by
the use of unauthorized or remanufactured parts.
The maintenance methods stated in this Operation and
Maintenance Manual are the most efficient and safest
work procedures. Some work procedures require special
tools.
For questions about genuine parts and special tools,
please contact us.
This Operation and Maintenance Manual includes 'Dan-
ger,' 'Warning,' and 'Caution' in order to reduce possible
injuries and engine faults which may occur while perform-
ing maintenance. If workers do not follow the instructions,
critical faults in engine performance and operation or
serious bodily injury may occurred. 'Danger,' 'Warning,'
and 'Caution' instructions must be followed. However, we
inform you that it is not possible to describe all possible
and unexpected dangers which may arise while perform-
ing engine maintenance.
