Maintenance/Lubrication
Operation & Maintenance Manual
23221138 (5/08) Rev B
41
3. If the paint has faded or chalked, the use of a commercial grade, non-abrasive
car wax may partially restore the color and gloss.
Field Repair of Texture Paint
1. The sheet metal should be washed and clean of foreign material and then
thoroughly dried.
2. Clean and remove all grease and wax from the area to be painted using
Duponts 3900S Cleaner prior to sanding.
3. Use 320 grit sanding paper to repair any scratches or defects necessary.
4. Scuff sand the entire area to be painted with a red scotch brite pad.
5. Wipe the area clean using Duponts 3900S.
6. Blow and tack the area to be painted.
7. Apply a smooth coat of Duponts 1854S Tuffcoat Primer to all bare metal areas
and allow to dry.
WARNING
!
If performing more than visual inspections, disconnect battery.
Never operate this machine with any guards removed.
CAUTION
!
Use extreme care to avoid contacting hot surfaces.
Inch and metric hardware was used in the design and assembly of this
unit. Consult parts manual for clarification of usage.
Summary of Contents for Ingersoll Rand VHP40RMD
