XHP605
PRO--TEC
t
100 -- 300 PSI
RATED OPERATING PRESSURE
350 PSI
XHP 1001
10
_
F
125
_
F
50
_
C
40
_
C
30
_
C
20
_
C
10
_
C
0
_
C
--10
_
C
--20
_
C
--30
_
C
--40
_
C
104
_
F
86
_
F
65
_
F
50
_
F
32
_
F
14
_
F
--10
_
F
--22
_
F
--40
_
F
Refer to these charts for correct compressor fluid
required. Note that the selection of fluid is dependent on
the design operating pressure of the machine and the
ambient temperature expected to be encountered
before the next oil change.
Note: Fluids listed as “preferred” are required for
extended warranty.
Compressor oil carryover (oil consumption) may be
greater with the use of alternative fluids.
100 psi to 300 psi
350 psi
Design Operating
Pressure
Ambient
Temperature
Specification
Portable Compressor Fluid Chart
(--23
_
C to 52
_
C)
--10
_
F to 125
_
F
Pro--Tec
t
XHP 605
--10
_
F to 125
_
F
(--23
_
C to 52
_
C)
65
_
F to 125
_
F
XHP1001
Preferred Portable Power Fluids -- Use of these fluids with
original filters can extend airend warranty. Refer to opera-
tor’s manual warranty section for details or contact your
Portable Power representative.
XHP405
(--18
_
C to 52
_
C)
XHP605
Alternate:
XHP405
Preferred:
Preferred:
Alternate:
Preferred:
Consult Factory
Consult Factory
ISO Viscosity Grade 46
with rust and oxidation
inhibitors, designed for
air compressor service.
ISO Viscosity Grade 68
Group 3 or 5 with rust
and oxidation inhibitors
designed for air com-
pressor service.
Preferred Fluids
1 gal.
(3.8
Litre)
5 gal.
(19.0
Litre)
55 gal.
(208.2Litre)
220 gal.
(836
litre)
Preferred:
Pro--Tec
t
36899698
36899706
36899714
36899722
XHP605
--
22252076
22252050
22252068
XHP1001
--
35612738
35300516
--
XHP405
--
22252126
22252100
22252118
