4.
When the numerical value becomes constant, a beep sounds and the measured numerical
value is fixed.
5.
To reset the fixed value, press the Reset button or the
①
button.
6.
To cancel the HOLD function, press and hold the Reset button for 2 seconds or longer. H-OFF is
displayed on the LCD screen and the HOLD function is turned off.
■
Tare measurement method (weight measurement method excluding container)
1.
Refer to steps 1 to 6 of the usage method and weigh the tare (container) only.
2.
Press the Reset button during measurement, and the numerical value display on the LCD screen
will change to "0.00kg".
3.
It is possible to measure only the target object by putting the target object in the container in
this state.
* The set tare (container) weight is after removing the tare (container). It can be canceled by pressing
the Reset button.
* During tare subtraction measurement, + is displayed at the bottom of the LCD screen.
* The tare weight measurement function can be used even when the HOLD function is on.
■
Notes on using
•
This product is a precision instrument. Please handle it carefully.
•
If you feel any abnormality during use, stop using it immediately.
•
This product is not drip-proof or waterproof. Do not use in rainy or humid places.
•
When measuring, hold the product body firmly and lift it slowly. Suddenly lifting the luggage
may cause a malfunction.
•
The measurable load capacity of this product is 44 kg. Do not use beyond the load capacity, as it
may cause a malfunction.
•
Remove the batteries when storing. Depending on the storage environment, there is a risk of
leakage if the battery is stored.
•
Do not use any batteries other than AAA batteries. It may not operate properly and may cause
a malfunction.
•
The included battery is a test battery for operation check. Replace with a new battery as soon
as possible please.
•
Use and store the product out of reach of children.
•
When disposing, please follow the disposal regulations of each local government.
