37
Forward-Facing Child Restraint
Installation with Vehicle Seat Belts:
Lap/Shoulder Belt
Lap Belt
WARNING
!
Fasten the UAS belt hooks together
behind the shell when not in use. A loose
UAS system could cause injury or death.
For vehicles with an air bag, but without
a back seat, refer to your vehicle owner’s
manual.
Forwar
d-Facing Child Restraint Installation with
V
ehicle Seat Belts:
10-18 kg (22-40 lb
.),
74-102 cm (29-40 in.)
Note:
Do not use universal anchorage system (UAS)
when using the vehicle seat belt.
•
Check vehicle owner’s manual for seat belt use
with a child restraint.
•
You may need to remove the base for narrow
vehicle seats or airline use (see “Removing
Base” section).
•
Do not use the level to ground line on the
shoulder belt positioning guide in the forward
facing position.
When UAS is not in
use, fasten UAS
hooks behind the
child restraint as
shown.
1
continued on next page.
With one hand at belt
path, push and pull the
child restraint from side
to side, forward and back.
If the UAS belt does not
loosen, the child restraint
should be secure.
If belt loosens, repeat all
steps. Check your vehicle
owner’s manual or call
DJG Consumer Relations
for help.
10
To remove the UAS belt
push down on UAS belt
adjuster button to
loosen belt. Unhook
UAS from bar.
11
38
4358-3434D Canada Elite Eng 3/17/08 9:05 AM Page 43
