34
35
Belt-Positioning Booster
Installation
Place child restraint against
the back of the vehicle
seat.
NOTE:
Tuck the
top anchorage strap and
hook under the child
restraint.
Place the child’s bottom
and back flat against the
child restraint.
1
2
Place lap belt across child’s
thighs. Lock buckle.
NOTE:
If your child
restraint has armrests,
make sure the lap and
shoulder belt are placed
under armrest as shown.
Secure the shoulder belt
through one of the
notches in the shoulder
belt guide.The belt
should cross the base of
the child's neck and
across the chest (not the
face or neck). Pull up on
the shoulder belt to
tighten.
Check periodically to
ensure your child has not
moved out of position
and loosened the
shoulder belt.
3
WARNING
!
Check vehicle instructions for more
information about air bag/child restraint
use.
Do Not Use only the lap
belt when using this seat
as a belt-positioning
booster without the
internal harness.
The shoulder belt must
always be adjusted snugly
across the child’s chest.
NEVER place the
shoulder belt under the
child’s arms.
Failure to follow these warnings can result
in serious injury or death to your child.
Belt-P
ositioning Booster Use:
40-80 lbs.
(18.1-36.3 kg),
43-52” (110.1-132.1 cm),
Ov
er 1 y
ear of age
.
WARNING
!
Use only the vehicle’s lap and shoulder belt
system when restraining the child in this
booster seat. Failure to do this can result
in serious injury or death.
4358-3502C Notch Commuter 5/30/06 12:50 PM Page 37
Page 19 of 23 Dorel Commuter / Ventura / High Back Booster (5/06)
