• vvv
6
2b
3a
2a
covet
4 wheel stroller
assembling stroller
Step 2: rear wheel assembly
• Slide rear wheels onto the frame of the
stroller (Figure 2a).
• Push the wheels in until you hear them
lock in place. Listen for ‘click’.
• To remove the rear wheel assembly, pull
and hold the metal tab while removing rear
wheel from the axle (Figure 2b). Repeat on
the other side.
3b
push
pull
pull
push
push
click!
click!
Step 3: front wheel assembly
• Lay the open stroller upside down with the
handle on the floor.
• Align the shaft on the wheel with the hole
in the front leg and push in (Figure 3a).
Listen for a ‘click’.
• Repeat on the other side.
• To remove the front wheel assembly, locate
the metal pin behind the front tube and
press it inwards while pulling the wheel off
(Figure 3b).
