background image

IMPORTANT: KEEP THIS BOOKLET IN THE POCKET 

PROVIDED AT THE REAR OF THE CHILD RESTRAINT

REF # 014914 

   

                          11/13

WARRANTY

DOREL AUSTRALIA PTY LTD WARRANTS YOUR NEW PRODUCT TO 
BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP FOR 6 
YEARS ON THE SEAT & 2 YEARS ON THE TRIM, FROM THE DATE OF 
PURCHASE, PROVIDED THAT THE PRODUCT IS USED IN ACCORDANCE 
WITH ACCOMPANYING RECOMMENDATIONS OR INSTRUCTIONS WHERE 
PROVIDED. THE BENEFIT OF THIS WARRANTY IS IN ADDITION TO YOUR RIGHTS 
UNDER THE  AUSTRALIAN CONSUMER LAW AND TO OTHER RIGHTS 
AND RE MEDIES OF THE CONSUMER UNDER A LAW IN RELATION TO 
THE GOODS OR SERVICES TO WHICH THE WARRANTY RELATES.

DOREL AUSTRALIA PTY LTD WILL PROVIDE YOU WITH YOUR CHOICE 
OF A REFUND, REPAIR OR EXCHANGE (WHERE POSSIBLE) FOR THIS  
PRODUCT IF IT BECOMES DEFECTIVE WITHIN THE WARRANTY PERIOD.  
DOREL   AUSTRALIA PTY LTD WILL BEAR THE REASONABLE EXPENSE 
OF CLAIMING THE WARRANTY.  THIS WARRANTY WILL NO LONGER 
APPLY WHERE THE DEFECT IS A RESULT OF ALTERATION, ACCIDENT, 
MISUSE, ABUSE OR NEGLECT.

PLEASE RETAIN YOUR RECEIPT AS PROOF OF PURCHASE AND 
CONTACT OUR CUSTOMER SERVICE CENTRE ON PH: 1300 809 526 OR 
ALTERNATIVELY, VIA OUR WEBSITE AT WWW.DOREL.COM.AU  FOR 
ANY DIFFICULTIES WITH YOUR PRODUCT.  WARRANTY CLAIMS AND 
CLAIMS FOR EXPENSE INCURRED IN RETURNING THIS PRODUCT CAN 
BE ADDRESSED TO OUR CUSTOMER SERVICE CENTRE AT 655-685 
SOMERVILLE ROAD, WEST SUNSHINE VIC 3020.

FOR NEW ZEALAND PLEASE CONTACT CUSTOMER SERVICE CENTRE, 
14 SIR WILLIAM AVENUE, EAST TAMAKI, AUCKLAND, 2013. AUCKLAND: 
(09) 274 1040 NZ WIDE: 0800 628 000 (TOLL FREE). HOURS: 8:00 AM - 
4:00 PM, MONDAY TO FRIDAY.

OUR GOODS COME WITH GUARANTEES THAT CANNOT BE 
EXCLUDED UNDER THE AUSTRALIAN CONSUMER LAW.  
YOU ARE ENTITLED TO A REPLACEMENT OR REFUND FOR A
MAJOR FAILURE AND COMPENSATION FOR ANY OTHER 
REASONABLY FORESEEABLE LOSS OR DAMAGE.  YOU ARE
ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR 
REPLACED IF THE GOODS FAIL TO BE OF ACCEPTABLE
QUALITY AND THE FAILURE DOES NOT AMOUNT TO A 
MAJOR FAILURE.

Australian

Standard

AS/NZS 1754 Lic 40071

SAI Global

Summary of Contents for GMA 2010

































Reviews: