background image

Safe use rules

The safe use of Industrial Intrinsically safe EX handheld terminal EX PDA500i is based 

on the user's compliance with the following rules of use.

a)

The battery provided by the mobile phone is a battery specially produced by the

manufacturer, and only the original battery meets the intrinsic safety requirements.Any 

other non-original battery will cause the explosion-proof performance of the phone to 

fail. So be sure to use the original battery. If you need to replace the battery, please 

contact Beijing Delan.Battery is

 Ex Battery 010 6000mAh

 

Explosion-proof polymer 

battery.

b)

Charging the phone battery must be done in a safe area. And you must use the

original charger. The maximum charging voltage is 4.3V.

c)

It is forbidden to replace batteries for mobile phones in explosion hazardous

locations.
d) It is forbidden to be used in zone 0 of dangerous explosion places.

e) 

It is forbidden to use earphones, data cables and other plug-in devices and Use

flash functionin explosion hazardous locations.

f) 

It is forbidden to use the mobile phone vibration function in explosion hazardous

locations

.

g) 

Keep away from high temperatures when using the phone.

Failure and damage handling

Any factor causing the phone may lose its intrinsic safety performance,please  stop 

using it in a dangerous place. It is recommended to send the  phone back to the 

manufacturer for testing

Conditions that may cause the explosion-proof performance of mobile phones to fail 

include the following:
The phone case is damaged; 

the explosion-proof mark cannot be identified;

Stored in areas that do not meet storage conditions; damaged in transit;

Other functions fail.

3

Summary of Contents for EX PDA500i













Reviews: