Commissioning
Technical Manual
58
04043552 - 07/2017
Terminal 97 00
6.4.2.1
Reader type
Depending on the device, up to three readers can be configured. The reader type connected to
the respective interface is set under ‘Type’. If no reader is available, ‘NONE’ must be set as
reader type.
Type
Supported readers
NONE
No reader connected
LEGIC_4200
RMs SM-4200 LEGIC advant & SM-4200-M (MRD in LEGIC
mode)
MIFARE
Kaba MIFARE (ARIOS security concept)
MIFARE_4200
RMs SM-4200-M (MRD in MIFARE mode)
BIOMETRIC_CBM
Biometric CBM reader
HID_ICLASS_SE_PROX
HID iCLASS SE / prox reader
HID_PROX
HID proximity reader
HID_ICLASS
HID iCLASS reader
BARCODE
Barcode, CCD barcode scanner
MAGNETIC
Magnetic swipe, Baltech MIFARE, Hitag
SPECIAL2
Reader with serial FLI2/FLI3
SPECIAL
Reader with serial FLI
TRANSPARENT
Special applications
Devices with MRD reader (multi-reader device)
Devices with MRD reader (RMs SM-4200-M) support LEGIC or MIFARE media, depending on
the reader type set.
For LEGIC media, the ‘LEGIC_4200’ reader type has been factory-preset.
For processing MIFARE media, the reader type must be changed to ‘MIFARE_4200’.
LEGIC media are configured in the same way as pure LEGIC readers by means of an
SM-4200 chip via the files ‘mediaact.ini’ and ‘mediadef.ini’.
MIFARE media are configured in the same way as the predecessor ‘Kaba MIFARE’ via the ‘sys-
tem.ini’ file.
6.4.2.2
Interface
To set the interface the reader is connected to.
The device supports up to three readers. Depending on options, the reader assignment of the
COM ports is as follows:
First internal reader
Second internal reader
External reader
COM2 (RFID)
-
COM4
COM2 (substructure reader)
-
COM4
COM2 (RFID)
COM1 (substructure reader)
COM4
COM1 (CBM)
-
COM4
COM1 (CBM)
COM2 (RFID)
COM4
COM1 (CBM)
COM2 (substructure reader)
COM4