Installation Instructions for Wi-Q™ Technology 45HQ Mortise Locks
BEST
a Product Group of dormakaba USA Inc.
Installing the trim
8
14
Install bottom cover
(inside escutcheon)
1 Position the battery wires above the side tabs and
against the side of the fire plate, as shown in
Figure 13.
2
Optional for Thumb Turn option only:
Make sure
that the Thumb Turn is in the upright position, as
shown in Figure 13.
3
Making sure that the cover does not pinch the
wires
, guide the bottom cover over the chassis onto
the fire plate.
Note:
Phillips Type 2 and T20 Torx options are avail-
able for the cover mounting screws.
Inside of door
Figure 13 Installing the bottom cover
Bottom
cover
Cover
screws
Battery wires
Thumb turn
(optional)
Antenna wire