A89995_A
©
2019 All rights reserved.
5/8
BEST is a trademark of dormakaba USA Inc.
1
1
2
3
Route the Ethernet cable
(H)
and the DC power cable
(G)
into the IPG enclosure
(J)
using the knockouts and the
cable grommets supplied.
Attach the mounting bracket assembly
(C)
to the IPG enclosure
(J)
using the two
provided #6-32 x 3/4" machine screws
(E
(2x)
)
.
Attach the IPG enclosure
(J)
to the wall using
the appropriate anchors and screws.
ATTACH ENCLOSURE
ROUTE
CABLES
ATTACH MOUNTING
BRACKET ASSEMBLY
H
G
J
J
J
C
E
(2x)
4
1
Connect the Ethernet cable
(H)
and the DC power cable
(G)
to the gateway
(A)
.
2
Route the Ethernet cable
(H)
and the DC
power cable
(G)
into the channel on the
bottom of the gateway
(A)
.
CONNECT
CABLES
NOTE:
Ethernet cable
(H)
not included, required for
install; DC power cable
(G)
optional to use, not needed
if powered by PoE; IPG
enclosure
(J)
optional and
sold separately
NOTE:
IPG enclosure
(J)
optional and sold separately
NOTE:
IPG enclosure
(J)
optional and sold separately;
anchors and screws not
included
2
Slide the gateway
(A)
onto the
mounting bracket assembly feet
(C)
until it snaps into place.
3
The omni-directional cable
(I)
will
pass through the holes in the top of
the IPG enclosure
(J)
.
5
I
A
1
Install the antennas
(B
(2x)
)
onto the
gateway
(A)
using 4-6 in-lb torque.
The antennas
(B
(2x)
)
must be oriented
vertically when installed.
1
Install the Omni-Directional
Antenna Kit
(I)
onto the
gateway
(A)
.
INSTALL
ANTENNAS
INSTALL
ANTENNA KIT
5
A
B
(2x)
NOTE:
Omni-Directional Antenna Kit
(I)
optional and sold separately
I
A
SLIDE/SNAP
ON GATEWAY
2
Slide the gateway
(A)
onto the
mounting bracket assembly
feet
(C)
until it snaps into place.
3
The antennas
(B
(2x)
)
will pass
through the holes in the top
of the IPG enclosure
(J)
.
6
SLIDE/SNAP
ON GATEWAY
6
J
A
B
(2x)
NOTE:
IPG enclosure
(J)
optional and sold separately
NOTE:
IPG enclosure
(J)
optional and sold separately
C
C
J
(OPTION 1)
(OPTION 2)
NOTE:
Ethernet cable
(H)
not included, required for
install; DC power cable
(G)
optional to use, not needed
if powered by PoE
Pass through
top of the
enclosure.
COMPLETE
COMPLETE
Integrated Portal Gateway (IPG) Enclosure Installation
1
1
2
2
A
2
H
G
1
3
3
