Installation
Technical Manual
22
1220013692 - 11/2017
dormakaba digital cylinder
4.2.2
Installation version B
1
1.
Remove the outer door knob.
2
3
4
2.
Attach the multitool to the securing shackle from below.
3.
Pull out the securing shackle.
4.
Remove the knob module.
5
6
5.
Align the cam flush with the cylinder housing.
6.
Push the cylinder housing through the lock from the inner
side of the door.
7
7.
Position the forend locking stud in the lock and tighten it
slightly.
8
8
8.
Install the fittings.
9
9.
Note:
Align the locking spring and the notch with each other!
Place the inner door knob on the cylinder housing.