Basic safety instructions
Technical Manual
8
1220013692 - 11/2017
dormakaba digital cylinder
2 Basic safety instructions
This product has been built to state-of-the-art standards and in line with established safety
regulations. However, hazards for persons and property may arise when handling the product.
Read and observe the following safety instructions before using the product.
2.1
Proper use
This product has been designed exclusively for use as set out in the chapter Product Descrip-
tion. Any other use will be deemed improper use. The manufacturer accepts no liability for any
resulting damage. The user/operator bears sole responsibility for the risk.
2.2
Product changes
NOTICE
No changes should be made to the product, unless in accordance with changes described in
the instructions.
2.3
Use in emergency exit or panic door locks
WARNING
Risk of personal injury or death.
•
Improper use or incorrectly installed digital cylinders can lead to emergency exit locks or
panic door locks and doors not opening.
•
The use of a digital cylinder must be checked carefully before using it in locks with a panic
function.
•
Before installing the digital cylinder in an escape door, a check must be carried out to en-
sure that the function of the lever handle or the panic push bar is not obstructed by the
inside knob.
•
The use of a digital cylinder in emergency exit locks in accordance with EN 179 or in panic
door locks in accordance with EN 1125 is documented in the lock manufacturers' perform-
ance declarations. If the digital cylinder is not listed in the performance declarations or
certificates from the lock manufacturer or the lock does not comply with these standards,
an EC conformity inspection of the lock, digital cylinder, fitting and assembly accessories
as one unit must be carried out.
