46
ED100LE
02-2021
DL4616-001
dormakaba ED100LE operator – Fine cover
Installation Instructions
Chapter 17
17.3.1 Push arm hardware.
1. Reference Para. 9.2 for push arm
hardware.
17.3.2 Attach drive arm to closer.
CAUTION
Door must be fully closed!
WARNING
Use caution when working in
proximity of door and push arm!.
2. Insert axle extension (Fig. 17.3.2) into
drive arm.
3. Move arm to 8816, inserting arm into
8816 pinion at a 90⁰ angle.
4. Insert M8 SHCS through drive arm and
axle extension. Thread SHCS into 8816
pinion and tighten.
NOTICE
M8 SHCS tightening torque.
Use torque wrench (25 ft-lbs) to
tighten SHCS to 17 ft-lb [23 Nm].
17.3 Push arm installation
Fig. 17.3.1
Drive arm installation
1
Drive arm
2
20 mm axle
extension
90°
1
2
3
3
20 mm bolt axle
extension
Fig. 17.3.2 Drive axle extensions
1
20 mm axle
extension, door
closer,
HC4680-001
2
60 mm axle
extension, door
closer,
HC4680-002
1
2
Fig. 17.3.4 Push arm screw kit
HK2719-010
1
10-24 x 1 1/2" pan
head Philips
slotted barrel nut
DF2718-01Z
2
10-24 x 1/2 " pan
head Philips screw
DF3278-01Z
Fig. 17.3.3 Bolt, axle extensions
1
20 mm bolt,axle
extension
HF3465-020
2
60 mm bolt axle
extension
HF3465-040
1
2
1
2
