71
ED50
08-2018
DL4614-140
dormakaba ED50 OHC Installation Instructions
Chapter 30
Fig. 30.5.4 Door bottom pivot on floor pivot bearing
1
Floor pivot
1.1
Height adjustment
2
Door bottom pivot
1
2
4
3
5
6
1.1
3
Door
4
Jamb
5
Door bottom pivot
mortise
6
Bearing
30.5.1 Hang door. RH inswing example.
TIPS AND RECOMMENDATIONS
A second person is recommended for door
installation!
WARNING
Hand pinch point and crushing hazards during
door install.
WARNING
Crushing hazards during door install.
30.5.2 Move door under overhead arm.
1. Hold door vertical and parallel to overhead arm.
2. Move door under overhead arm (Fig. 30.5.2).
30.5.3 Slide door onto bottom pivot.
1. Slide bottom door pivot release lever over bottom
pivot(Fig. 30.3.3) until door lowers onto bottom pivot
bearing (Fig. 30.5.4).
• Bottom door pivot release lever holds door bottom
pivot in place over bearing.
2. Overhead arm mounting holes should be aligned
with hex bolt clearance holes in overhead arm
mortise (Fig. 30.5.3).
30.5 Hang door
1
1.1
2
3
4
4.1
Fig. 30.5.1 Door positioned for installation
Fig. 30.5.2 Slide door onto bottom pivot
1
Floor pivot
1.1
Bearing
2
Door bottom pivot
3
Overhead arm
4
Overhead arm door
mortise
4.1
Clearance holes for
1/4 x 1" SHCS
Fig. 30.5.3 Overhead arm in door mortise
Slide door into
position
