20
ED50
08-2018
DL4614-140
dormakaba ED50 OHC Installation Instructions
Chapter 10
10 User interface
Fig. 10.2.1 Keypad and display
2
2 digit display
6
Button legend
10.2 4 button keypad and display
Right button
1. Access parameter menu:
> 3s PRG.
2. Edit selected parameter.
3. Save changed value.
Left button
1. < 3s Quit
2. Exit parameter menu,
press button >3s Reset
Both buttons
together
1. Acknowledge errors,
press both buttons < 3 s.
2. Reset, press both
buttons > 3 s.
Up button
1. Scroll through parameters
and error messages.
2. Increase parameter value.
10.2.1 Operator user interfaces
4 button keypad and 2 digit display:
• 4 button keypad to select, input and
adjust door parameter values.
• 2 digit display; parameter values, error
and information codes.
10.2.2 4 button keypad
4 button legend can be orientated so
buttons have same function and position
regardless of operator orientation. Button
legend can be removed and rotated.
10.2.3 4 button keypad functions
Down button
1. Scroll through parameters
and error messages.
2. Reduce parameter value.
3. Opening pulse, press
button < 3 s.
4. Learning cycle, press
button > 3 s.
5. Reset with factory setting,
press button > 8 s
(Program switch CLOSE).
6. Identify operator
orientation for display.
> 3s Reset
< 3s Quit
LEARN
< 3s
> 3s
Fact-Setup
PRG
> 3s
> 8s
6
2
10.1 ED50 OHC operator user interface
1
RH operator
4 button keypad
and 2 digit display
Fig. 10.1.1 OHC ED50 operator - header orientation for LH outswing or RH inswing
TIPS AND RECOMMENDATIONS
Keypad arrow symbols
<, "less than" symbol
>, "greater than" symbol
<3s: momentarily press button.
>3s: Press button greater than
3 seconds.
1
