dormakaba Header Installation Instructions with EML310/320 and 371/372
For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)
933903
07-2019
EML Header Shim
5
Technical specifications
1.1.4
EML310/320 Mechanical specifications:
(Including 1/4” [6.4] mounting bracket)
•
EML310 Lock dimensions:
1-5/8”D x 2-7/8”W x 10-1/2”L [41 x 73 x 268]
•
EML320 Lock dimensions:
1-5/8”D x 2-7/8”W x 21-1/8”L [41 x 73 x 536]
•
Standard armature plate dimensions:
5/8”D x 2-3/8”W x 7-7/16”L [16 x 61 x 190]
•
DP armature plate:
9-3/4”L [247]
1.1.5
EML371/372 Mechanical specifications:
(Including 3/16” [4.8] mounting bracket)
•
EML371 Lock dimensions:
1”D x 1-7/8”W x 9-3/8”L [25 x 47.6 x 238]
•
EML372 Lock dimensions:
1”D x 1-7/8”W x 18-3/4”L [25 x 47.6 x 476]
•
Armature plate dimensions:
7/16”D x 1-1/2”W x 7-1/4”L [11 x 38 x 184]
1.1.6
Environmental specifications:
•
Not for use in outdoor environments.
•
Circuit board operating temperature: 14° to 140°F
[-10° to 60°C]
1.1.7
EML310/320 Electrical specifications:
•
BA Output Relay ∆: SPDT relay. Contacts rated at
1.25A @ 24VDC.
•
DP Reed Switch ∆: Magnetically actuated SPDT
switch. Contacts rated for 0.20A @ 12VDC and
0.12A @ 24VDC.
∆
Effective for either resistive or inductive loads
(power factor ≥0.6 with inductive loads.)
NOTE:
Specification may change without
notice.
1.1.8
EML371/372 Electrical specifications:
•
SCS Output Relay: SPDT relay. Contacts rated at
1.0A at 24VDC.
•
DSS Reed Switch: Magnetically actuated SPDT
switch. Contacts rated for 0.20A @ 12VDC and
0.12A @ 24VDC.
NOTE:
Specification may change without
notice.
Power Supply:
Voltage
EML310
EML320
EML371
EML372
12VDC
0.65A
0.65A x 2 = 1.30A
0.52A
0.52A x 2 = 1.04A
24VDC
0.45A
0.45A x 2 = 0.90A
0.26A
0.26A x 2 = 0.52A
NOTE: All dormakaba electromagnetic locks must be
powered with a Listed filtered and regulated DC power
supplies such as the dormakaba PS Series UL Listed
Power Supply. dormakaba offers a full line of power
supplies and switching devices that are suitable for use
with the EML310/EML320 locks and EML371/EML372
locks.
1.1.9
Inspection and Maintenance
•
This product and all related accessories or parts
must be inspected and maintained on a quarterly
basis. Contacting surfaces of the electromagnetic
lock and armature plate must be kept free of
contaminating materials. Surfaces must be
cleaned periodically with a non-abrasive cleaner.
•
All mounting fasteners must be inspected on a
quarterly basis. When properly installed, the ends
of the armature plate allow slight movement but
the plate will feel secure when grasped at the bolt.
There should be no movement to the mounting
bracket or housing of the electromagnetic lock.
•
For added safety, thread locking compound has
been provided for the armature plate bolt and the
four captive electromagnetic lock mounting screws.
•
WARNING: Improper installation, maintenance,
inspection or usage of the product or any related
accessories or parts may cause the
electromagnetic lock mounting screws to fail.
•
dormakaba will not be liable to the installer,
purchaser, end user or anyone else for damage or
injury to person or property due to improper
installation, care, storage, handling, maintenance,
inspection, abuse, misuse or act of God or nature
involving this product or any related accessories or
parts.