background image

SVP/SVZ door locks

Mounting instructions

WN 059744 45532/14767 
2020-03

EN

Contents

About this document 

1

2 Safety 

2

Product description  

3

4 Mounting 

8

Parameterization (SVP 2000/2000F only) 

15

Integrated Power Reserve module test 
(SVP 2000F) 

18

Pin assignment 

18

Complete mounting  

19

Error messages 

20

10 Maintenance 

20

11 

Disassembly and disposal 

20

About this document

1.1  Contents and purpose

SVP/SVZ door locks are available in various designs 
for tubular frame doors and for solid doors. This 
manual describes mounting in tubular frame and solid 
doors.

1.2  Target group 

SVP/SVZ door locks must only be mounted by 
technically qualified personnel.

1.3  Other applicable documents

•  Manual for the connection cable SVP-A 1100/2100 

(not necessary for SVP 5000)

•  Mounting instructions for the components used, e.g. 

the door handle

1.4  Abbreviations

SVP

Emergency lock with self locking 
action

SVZ

Access control lock with 
self locking action, without 
emergency escape action

2000, 2000F, 
4000, 5000, 
6000

All versions of a door lock; the 
exact lock type is marked with 3 
digits instead of zeros.

TMS Soft®

Software for the dormakaba 
door management system (TMS)

DCW® bus

DCW® is the short form for 
"DORMA Connect & Work".  
A dormakaba-owned fieldbus 
system for the connection of up 
to 4 identical components to a 
DCW® central unit.

CAN bus

Serial fieldbus system according 
to ISO 11898-3, for connecting 
several components to one cable 
harness

RR

Tubular frame locks

VB

Solid door locks

1.5  Symbols used

1.5.1  Hazard categories

WARNING

This signal word indicates a possible 
hazardous situation which may result in 
death or serious injury if not averted.

ATTENTION

This signal word indicates a situation of 
potential risk, which could lead to damage 
to property or the environment if not 
averted.

TIPS AND RECOMMENDATIONS

This signal word indicates useful information 
for efficient and trouble-free operation.

1.5.2  More symbols

1.

2.

Sequence of action steps

1

2

Item numbers used in image 

caption

Summary of Contents for SVP





















Reviews: