English
0
Other network services
The most common network/extra services can be accessed via the menu or
using the menu buttons during a call.
Some functions are pre-programmed but is not certain that all functions will
work on delivery as this will depend on the country of installation/network.
The functions available will depend on your network.
You can change the codes that are sent, see below.
You may have to pay extra for some services, contact your network for more information. Some services will not
work unless you have contacted your network service provider to activate them.
Using the R button manually
1.
Connect an external call and wait until the timer is shown. Press
R
.
2.
Enter telephone number or manual code. Press
OK
.
Busy number/call waiting
1.
Connect an external call and wait until the timer is shown.
2.
Press
Option
. Scroll to required service.
-
CW Accept
Answer incoming call waiting (=
R
2
).
-
CW Reject
Refuse incoming call waiting and send engaged tone (=
R
0
).
-
Auto Call Back
When a number is no longer engaged a quick ring signal is heard (=
5
).
3.
Press
OK
.
Under inquiry/alternating/answered call waiting
1.
Use the respective menu button:
-
Brok
Alternate between two calls (=
R
2
).
-
Conf
Conference/three party call (=
R
3
).
Call Forwarding
1.
Press
Menu
. Scroll to
Network Services
. Press
OK
.
2.
Scroll to
Call Forwarding
. Press
OK
.
3.
Scroll to required service. Call forwarding:
CF Unconditional
/
if No Reply
/
if Busy
for
transfer of your incoming calls to another telephone number.
4.
Press
OK
. Follow the instructions given in the receiver, handsfree or the display.
Other services
1.
Press
Menu
.
Scroll to
Network Services
. Press
OK
.
2.
Scroll to
Functions
. Press
OK
.
Scroll to required service.
-
Call Anonymous
Withhold your number from recipient. Enter number.
Press
. The code for this service must be programmed manually, see below.
-
Call Wait On
/
Off
Command to turn the call waiting service off or on easily.
-
Network Codes
The codes that are sent when you use the network services can be
changed. The number for Messages indication can also be programmed here.
3.
Press
OK
. Follow the instructions given in the receiver, handsfree or the display.
Inbox
Shows a summary of new messages e.g. SMS, incoming numbers, message
indication etc. Only shown when there are new messages.
Summary of Contents for 670
Page 1: ...doro 670 680R ...
Page 24: ...English Version 1 0 ...
