English
BS RINGER
Select ring tone for the base station. Press
OK
to confirm.
RING SETUP,
RING VOLUME
Base station ringer signal.
Select ringer signal for
INT. RING
(internal calls) and for
EXT. RING
(external
calls).
Base station ringer volume.
1
= lowest,
5
= highest, or
VOLUME OFF
. Press
OK
to confirm.
The base station’s ringer signal can be adjusted
KEY TONE
Key tone ON or OFF
DELETE HS
To de-register a DECT handset.
FLASH TIME
Recall time.
LONG
=New Zeeland.
MEDIUM
=France/Portugal.
SHORT
=others including UK/AUS.
BS DEFAULT
Resets all base station settings to default.
CHANGE PIN
The code (default 0000) can be changed.
Note!
A de-registered DECT handset can no longer be used with the system!
Expanded system (two or more DECT handsets)
The call number for internal calls will be displayed in standby. The base station should be
positioned centrally so that the coverage area is roughly equal for all DECT handsets.
Register a new DECT handset
All DECT handsets included in the package are already registered to the base station. You
can register up to 5 handsets to one base station.
Note!
This model is GAP (Generic Access Profile) compatible, which means that the handset and
the base station can both be used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee that all functions may be accessed.
1. On Base station: Press
=/O
. Select
REGISTRATION
. Press
=/O
to confirm.
2. On DECT handset: Press
. Select
REGISTRATION
. Press
OK
.
Enter PIN code (default code is 0000). Press
OK
.
3. If the registration is successful the unit will return to standby within one minute.
Intercom / internal call
1. Press
or
C/
.
2. On Base station: Use
v
or
V
to select the desired DECT handset. Press
=/O
.
On DECT handset: Enter call number
1
-
5
for the desired DECT handset or press
7
for
base station. Press
9
to call all units.
3. A tone will be heard if an external call comes in while an internal call is in progress.
End the internal call and then answer the external call.
Transferring calls/conference between units from DECT Handset
When an external call is connected;
1. Press
.
7
