Administration Manual ip500pbxw – English
20
Note
If you receive an error message or the Welcome page is not
displayed, see Configuring your PCs on page 155.
This is the first page displayed each time you log in to the Web
It provides links to the programming pages that are most commonly used.
This page contains links to the following pages:
•
Basic PABX Settings. (The most common settings for the telephone system).
•
Username / Password. (In most cases entering the Internet user name and password is all that is required to
allow Internet Access).
•
Router Configuration (This is only required if you are using a Cable modem or private network).
•
Wireless Security / Setup. (To set up a wireless connection to your PC(s).
•
Time and Date Settings (To set the Time and Date on the phone system).
Basic PABX Settings
From this page you can configure the most commonly used telephone system functions, which are:
•
Incoming Ringing. Selecting the phones that ring for incoming calls.
•
Station Names. Programming station names so that the names rather than station numbers used on the
featurephone.
•
Outgoing Restriction. You can restrict stations from making calls on particular lines.
•
Station Class of Service. Restricting phones from making particular types of call e.g. International calls
•
Cordless phone Registration. The cordless phones must be registered on the system before they can be
used to make telephone calls
•
Line Divert. On Power up incoming calls are forwarded to the Answering Machine if they are not answered
within 18 seconds. The forwarding set for each line can be changed or cancelled
Incoming Ringing
You can determine which phones ring for incoming calls. Calls on each line can be set to ring different phones. You can
also have different phones ringing when the system is in night mode.
For example, in DAY mode, all calls on Line1 might ring all phones, but in NIGHT mode all calls on Line 1 might be set to
only ring station 20.
To change the settings, select ON or OFF from the relevant drop down box for the Line/Station configuration you require.