Administration Manual ip500pbxw – English
24
Basic Router Configuration for an ADSL connection
Username / Password
The default settings for Internet Access over an ADSL line are set as PPPoA with a VPI of 8 and VCI of 35. You may need
to change these settings to those supplied by your broadband service provider. If this is so then go to page 57 to change
the type of access
When User Name / Password is selected on the Welcome page the following page is displayed:
1.
Enter the username and password or the username only if no password has been supplied. Type them in the
relevant boxes,
2. Click
Next>
. The following page is displayed:
3.
The settings of VPI =8 and VCI=35 are the default settings.
4. Click
Next>
. The following page is displayed:
This page confirms your settings. If the settings are correct, click Confirm Changes. The Internet Access page is displayed.
Basic Router Configuration for a Cable Modem connection
If your Internet access is provided by a cable modem the following programming is needed
1. Select
Router
Configuration
from the main menu.
Select
WAN/DMZ
Port
from the sub-menu. The following screen is displayed:
2. Select
the
Change
the
WAN/DMZ
settings
here
. The following screen is displayed:
