English
Installation
IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.
Installing the SIM card, memory card and the battery
The SIM and memory card holder’s are located inside the battery
compartment.
1
2
3
4
1.
Remove the battery cover and the battery if it is already installed.
2.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card’s contacts are facing inwards and that the cut off
corner is pointing downwards. Take care not to scratch or bend the
contacts on the SIM card.
3.
Optional: Insert the memory card into the slot under the SIM card
holder. Make sure that the memory card contacts are facing up-
wards and push the card in, until you hear a click. Take care not to
scratch or bend the contacts on the card.
To remove or replace the card, push the card in until you hear a click
and then pull the card out.
4.
Insert the battery by sliding it into the battery compartment with the
contacts facing upwards to the right. Replace the battery cover.
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type:
microSD, microSDHC
.
Incompatible cards may damage the card and the device and corrupt
data stored on the card.
Memory cards are sold separately.
1