17
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
3
Safety
3.1 Addresses for this Manual
It is therein assumed that only authorized, experienced personnel will perform installation, operating
and maintenance activities.
The activities therein described may only be carried out by:
-
sufficiently qualified personnel
[1]
for the operations to be carried out,
-
particularly trained personnel
[2]
for the operations to be carried out,
-
personnel having knowledge of the possible dangers
-
personnel having knowledge of the applicable safety regulations.
The installation, maintenance and repair of
Eco
Dose
3K can only be carried out by experienced
personnel
[3]
. An adequate advanced training or qualification of the personnel i has to be regularly
performed.
[1]
Therein meaning authorized, experienced and suited
[2]
Therein meaning trained and experienced
[3]
Qualification of operational personnel for jobs in explosive areas:
-
knowledge of general principles for the protection from explosions;
-
knowledge of general principles of the types of protection and the designation of protective
devices;
-
broad knowledge of inspection, maintenance and repair requirements in potentially explosive
areas according to IEC 60079 -17
If a precise assignment of responsibilities is necessary, this operating manual distinguishes
between:
-
Customer
(management, operations manager, installation manager or a comparable function
in the enterprise)
-
Operator
(installation operator, maintenance personnel, programmer, fitter and cleaner or a
comparable function in the enterprise).
The
customer
must ensure that the operator’s tasks and responsibilities have been clearly defined.
The
customer
must ensure that every operator has been informed and instructed about all
dangers. The customer must provide the operator with the necessary protective equipment. Each
operator must have been informed and instructed about safety functions and safety equipment.
The operator may only carry out the installation, commissioning, maintenance, repair and cleaning
activities expressly described in this operating manual. All the operations
not described
in this
manual can only be carried out by the manufacturer. For all maintenance, repair and cleaning
activities, you must observe the industrial safety regulations applicable at the place of the
installation
