76
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
Consumption data can be saved on the flash memory of the controller in a csv file which is possible
to access in read and write mode, with a FTP connection, connecting to the Ethernet port IF3 with
the credentials
user:
user
password
Ecodose3k
The file is saved daily in the folder F: \ consumption, with a name consisting of a pair of letters
assigned in the parameters settings section 4, followed by the date of the day in which the file is
written.
After successful file write the totalized consumption data are cleared. Leave the name file field
blank , if you do not want to occur writing and consequent data reset; the data are always accessible
and storable via USB port.
8.5.8
Parameters
Parameters are divided in five pages of setup.
To change a parameter value you must login with user level 3.
Figure 44 Parameters page 1
