73
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
In the right center of the screen there are buttons that allows to scroll the recipes list: it’s possible
to browse them one at a time, ten at a time or go to the first and to last directly.
In the right bottom of the screen there are three other buttons: copy, paste and save.
Copy button
By using this button you can copy temporarily a row of the recipes
table.
Paste button
By using this button you can paste a previously copied line onto
another.
Save button
By using this button you can save all the changes made.
8.5.6
Pre-purge, purge program
Figure 42 Pre purge and purge cycle page
Twenty different purge programs are available, each one can be associated in a recipe to a spray
gun.
In this page all the purge programs are listed, and numbered from one to twenty.
If the system is equipped with the purge air valve YPL1 the data table has also the columns of the
pre-purge-cycle data.
Programs 11 and 12 are used during the wash cycles long, for the spray guns 1 and 2 respectively.
