2
Safety
2.1
Explanation of symbols
The following notes can appear in this
instructions manual.
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
CAUTION!
Low risk situations that can lead to minor
injuries.
NOTICE!
Situations that can lead to material
damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Contains additional information
and recommendations.
2.2
Intended Use
Use
The
Eco
Gun AL AUTO spray gun is
intended for use in application stations only.
The
Eco
Gun AL AUTO spray gun is solely
intended for automatic coating of surfaces in
one of the following operating methods:
as independent, not hand guided, device
as part of a fully automated paint booth
as part of a paint robot
The material is fed through a high pressure
line.
The use is only permitted within the specified
The spray gun is approved for use in explo-
sive areas of Ex zones 1.
Wrong Use
Wrong use of the spray gun entails a risk of
death.
Do not aim the spray gun at people or
animals.
Do not atomize liquid nitrogen.
Combine the spray gun only with compo-
nents approved by Dürr Systems for
operation.
Only use approved materials. Observe
the safety data sheets.
Use only the hoses approved for the
material and the operating pressure used.
Do not attempt to make conversions or
changes on your own.
Only use the spray gun in areas desig-
nated according to EX labeling.
EX labeling
II 2G T6 X
II
- Device group II: all areas except
mining
2G - Device category 2 for gas
T6 - Temperature class T6: Surface tem-
perature, max. 85 °C
X
- Specific conditions for safe operation
The following conditions must be observed
for safe operation:
The spray gun and the work piece must
be grounded.
Only use conductive lines.
Ensure that static electricity can be dis-
charged.
Safety
01/2017
EcoGun AL AUTO - MSG00012EN
5/40
