Operating
Manual
©
Dürr
Systems
AG
MCD00011EN
L058709070
EcoGun Cleaner M
Compiled : Vicentini
Release
10
Checked : Messina
Date 07.09.2017
Approved : Roncarati
14
3.3 Basic Information on our Safety Notes
A T T E N T I O N
The general dangers in the installation of EcoGun Cleaner M are not expressly referred
to in this manual. The personnel must be informed by the customer and correspondingly
trained concerning these dangers.
Also observe the information in
chapter 2.4
"Continuing Documentation".
In this operating manual, you will only find the safety notes that are directly
associated with the product described in this manual.
For the jobs described in this operating manual, it is an indispensable
requirement that the user of this operating manual knows and observes the
further installation documentation and their safety notes.
In addition, the user of this manual must pay attention to and observe the
legal safety regulations valid in the place of operation.
The meaning of the symbols used in our operating manuals is explained in
chapter 1
"Introduction".
3.4 Troubleshooting Instructions
Repairs may only be carried out by personnel that are particular trained for
that.
Faults, their cause and elimination have to be recorded correspondingly.
3.5 Special Safety Notes
Before performing maintenance and repair you must ensure that no residual
pressure (air and product) is present in EcoGun Cleaner M
W A R N I N G
Danger due to spurting out material!
Potential chemical burns of the skin by material spurting from defective paint hoses.
Check paint hoses regularly. Reduce any potentially pending pressures before working
at paint and air hoses.
