luna 350
5
snapchat: dospel.com
twitter.com/dospel_com
facebook.com/Dospel.Wentylacja
2.2.
Pre-assembly requirements
While planning the assembly of the unit consider:
n
ensuring the expliotation conditions of the unit
n
possibility of bringing about ventilation pipes to the device
n
possibility of siphonning of steam condensate
n
possility of bringing about electric energy
n
easy access to maintenance and repairs
Prior to connecting the unit check elements condition, including casing and wiring.
In order to avoid any damage, the unit should be kept in safe place in original packaging.
EN
Fig.2.
Flow efficiency characteristics
First gear
0
50
50
100
100
150
150
250
250
200
200
300
300
350
350
400
3
U[m /h]
400
450
P[Pa]
Luna 350 with 3-gear controller
Second gear
Third gear
2.3.
Mounting the unit
The unit is destined for assembly under dry roofed rooms with basements (attics, utility room).
The unit should be assembled in a way to allow free drain condensate from the tub.
Unit should be connected to ventilation ducts in accordance with designation on connectors
(air inlet, launcher, intake, exhaust). In case of removing the exchanger with tub and replacing
it, pay attention to tub position - necking which remove condensate from the exchanger must
be on the side of connectrs air inlet-launcher.
test
