16 in.
ASSEMBLY
STEP 1: Assemble Your Wall Plate
STEP 2.1: Attach Wall Plate to Wall ( Wood Stud Option )
27
27
28
03
02
10
Assemble Wall plate onto Wall plate as illustrated. Secure using four screws
in the holes shown (Use 6mm hex key ) ( fig 1.1 )
16
CAUTION:
Avoid potential personal injuries and property damage!
● Drywall covering the wall must not exceed 16 mm. (5/8 in )
● Minimum wood stud size: 51 x 102 mm. (2 x 4 in ) or 38 x 89 mm. (1.5 x 3.5 in)
● Horizontal space between fasteners: 406 mm. (16 in)
1: Locate your stud. Verify and mark the center of the stud by finding the stud edges using a pencil
and an edge-to-edge stud finder. ( fig 2.1 2.2 )
2: Drill pilot holes using a 5.5 mm. (7/32 in ) diameter drill bit. ( fig 2.3 )
3: Install wall plate assembly using four lag bolts and Washer . Tighten the lag bolts only
until they are pulled firmly against the wall plate assembly . do not over tighten. Over tightening
can damage the screw , reducing it's holding power.
16 in.
(406 mm)
03
10
16
02
1.1
2.1
2.2
