19
18
Index
1.
Introduction
19
2.
Kindly note / Safety Instructions
2.
Kindly note / Safety Instructions
19
3.
Delivery contents
3.
Delivery contents
19
4.
Equipment and usage
4.
Equipment and usage
19
5.
How to use device
5.
How to use device
5.1
Device description
20
5.2
Device start-up
21
5.2.1 Factory settings
21
5.2.1.1 Power-Save Mode for Display
22
5.2.2 Windows Software for LOG200 Series
22
5.2.2.1 Log Software Configuration Software
22
5.3
First start / start recording
22
5.3.1 Restart recording
23
5.3.2 Display used memory (%), date and time
24
5.4
Stop recording / create PDF
24
5.4.1 Stop recording by button
24
5.5
Description of PDF result file (Fig. C)
25
5.6
USB Connection
25
5.7
Display Modes and Mode - Button: EXT, AVG, MIN, MAX 26
5.7.1 Special function of Mode Button
27
5.7.1.1. Set marker
27
5.7.1.2 Reset Max-Min Buffer
27
5.8
Battery replacement / Battery status indication
27
5.8.1 Set Date and Time after battery replacement via button 28
5.9
Alerts
28
6.
Technical data
6.1 Risk of injury
6.
Technical data
6.1 Risk of injury
6.
Technical data
6.1 Risk of injury
29
7.
Explanation of symbol
7.
Explanation of symbol
30
8.
Waste disposal
8.
Waste disposal
30
9
Marking
9
Marking
30
10.
Storage and cleaning
10.
Storage and cleaning
30
1. Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before operating the data logger please
read this manual carefully. You will get useful information for understanding all functions.
2. Kindly note / Safety Instructions
• Check if
the contents of
the package is undamaged and complete.
• Remove the protection foil above the display.
•
For cleaning the instrument please do not use an abrasive cleaner only a dry or moist piece of soft
cloth. Do not allow any liquid into the interior of the device.
•
Please store the measuring instrument in a dry and clean place.
• Avoid any force like shocks or pressure to the instrument.
• No responsibility is taken for irregular or incomplete measurement values and their results, the liability
for subsequent damages is excluded!
•
Do not use the device in explosive areas. Danger of death!
•
Do not use the device in an environment hotter than 85 ° C! The lithium
battery may explode!
•
Do not expose the unsit to microwave radiantion. The lithium battery may explode!
3. Delivery contents
• Data logging
• Wall holder
4. Equipment and usage
LOG200 / LOG210 / LOG220 series loggers are suitable for recording, alarm tracking and display of
temperature, humidity *, dew point temperature *, barometric ** and CO
2 *** (*
only LOG210 / 220, **
temperature, humidity *, dew point temperature *, barometric ** and CO
2 *** (*
only LOG210 / 220, **
temperature, humidity *, dew point temperature *, barometric ** and CO
2 *** (*
only LOG210 / 220, **
only LOG220, *** only LOG220 E) measurements. LOG200 TC and LOG210 TC feature 2 external
inputs for thermocouples. The LOG200 E and LOG220 E feature one external
input for temperature or
CO
2+
Humidity probes (LOG220 E only). Areas of application include monitoring of storage and
CO
2+
Humidity probes (LOG220 E only). Areas of application include monitoring of storage and
CO
2+
Humidity probes (LOG220 E only). Areas of application include monitoring of storage and
transport conditions or other temperature, moisture and / or pressure-sensitive processes. LOG210
TC additionally supports wall mold detection. The logger has a built-in USB port and can be
connected without cables to all Windows PCs, Apple computers or tablets (USB adapter may be
required). The USB port is protected by a plastic cap. Beside the actual measurement result, the
display shows MIN-MAX and AVG measurements of each measurement
• Battery 3.6 Volt (already inserted)
• USB protective cap, 2 x thermocouple type K (TC only)
• 2x screws and dowels