background image

41

40

Attention!

 The battery change, the battery verifier's watch (internal watch) and the case, the modifier. Cf. 

Attention!

 The battery change, the battery verifier's watch (internal watch) and the case, the modifier. Cf. 

5.2.2.1 Logical configuration Log Connect or 5.8.1 Controller Date / Height on the keyboard for the change 
of the battery controller Date / Heure on the keyboard.

5.8 Changing the battery / Battery level display

Attention! 

For added convenience, learn about the battery guide: Utilize exclusivity with a battery of the 

Attention! 

For added convenience, learn about the battery guide: Utilize exclusivity with a battery of the 

type SAFT LS 14250 3.6 Volt or DYNAMIS Lithium Batt type battery. LI-110 1/2 AA / S old types of 
batteries approved by the manufacturer.

Tourner the battery of the 20 ° battery gauges, the 
battery of the battery 

Retire the battery and insure the new battery is done.

Change the battery OK: Read the LED lights on the pendant 
environment for 1 second and the beep will be switched off.

L'icône de la batterie vide 

apparait, signifiant qu'il faut aussitôt la 

brake plate. Certainly, you will be able to secure an environmental impact statement at 10 days.

• The battery of the poster displays a selection of cases in three segments.

Lorsque l'icône de la battery a l'ecran clignote, a veut 

dire que la 

Charge the battery with no surcharge for prendre des mesures.

5.7.1 Features of the bouton Mode
5.7.1.1 Rules for markers

Pour retention of events by private pendants of registration, by way of regulator of markers. You place 

the marker in the PDF graphic, as the basis of the bouton Mode appuyée pendant 2.5 (for the marker in 
the figure C of the illustration PDF). The marking is confirmed by a bip sonor. The marquee sera ensuite 
cleaning guard on prochain enregistrement (tenure of the cleaning interval).

5.7.1.2 Effacer la mémoire d'afficheage MAX, MIN

The registrar dispose of the MIN / MAX function permitting the conserver to add value over a period of 
time. Appuyez sur la touche MODE pendant 5 seconds jusqu'à ce qu'une mélodie retentisse. The period 
of measurement is based on the initial realization. For example, by way of example, températures diurnes 
les plus élevées / les plus basses. The MIN / MAX function is a subscription to the registration function. 
Note:

-

The memory MIN / MAX is the minimum initial registration of the poster of the poster's value, 

maximum and maximum manner of adjustment to the registration.

-

Pendant l registration, a marker and ancillary placement for minimum initialization of value, 

maximum and average.

Summary of Contents for LOG 200


























Reviews: