15
14
AVG:
MIN:
MAX:
Average
Minimum
Maximum
LOG20: Press the Key „B“ to switch between the Min-Max-Avg-values.
After approx 3 sec., the standard display is shown again.
2.4 Display segments of LCD (Fig. 2)
• Besides the two measurements, the large LCD displays several status information.
By using the Software DE-LOG-Graph you are able to switch on or off the display,
or to setup an interval how long the display will stay on when no button is pressed
(snooze function). By using this function it is possible to prevent it displaying
information to unauthorized persons.
E: Measurement 1displays the current temperature.
F: Unit Measurement 1 display the current measuring unit of measurement 1.
G: Measurement 2 displays the temperature measurement, average, minimum or
maximum measurements.
H: Unit Measurement 2 display the current measuring unit of measurement 2.
I: MAX-MIN-AVG display the average, minimum or maximum measurements.
J: Status info displays the operation mode LOG or STOP. LOG indicates the recording
mode and STOP indicates standby mode.
K: Lowbat indicates the capacity of the battery.
Note: °C = Celsius,°F = Fahrenheit
Other display information
• In addition to the above mentioned information, the display also indicates several
other information. This information will be displayed depending on the display settings
(snooze function) and operation mode:
2.5 LED-Indication
• The LED will help you to understand all logger information, several status modes and
alarm indications.
• LED red:
The red LED flashes when Hi- or Lo-Alarm has been achieved.
Display
connected
Logger
switched off
to the PC
configured
Logger
Battery
Factory settings
is recording
(total empty)
LOG10:
The display will switch
automatically every
10 seconds.
Summary of Contents for LOG10
Page 2: ...3 2 Fig 1 A C D B Fig 2 ...
