19
18
Index
1. Introduction
19
2. Kindly note
19
3. Delivery contents
19
4. Equipment and usage
19
5. How to use device
5.1
Device description
20
5.2
Start-up device
21
5.2.1 Factory presets
21
5.2.1.1 Power-Save Mode for Display
22
5.2.2 Windows Software for Log200-Serie
22
5.2.2.1 Configuration Software Log Connect
22
5.3
First start / start recording
22
5.3.1 Restart recording
23
5.3.2 Display used memory (%), date and time
24
5.4
Stop recording / create PDF
24
5.4.1 Stop recording by button.
24
5.5
Description of PDF result file (Fig. C)
25
5.6 USB-Connection
25
5.7
Mode-Button: EXT, AVG, MIN, MAX
26
5.7.1 Special function of Mode-Button
26
(Markings / reset Max-Min-Avg results)
5.8
Battery replacement / Battery status indication
27
5.8.1 Set Date and Time after battery replacement via button 28
5.9 Alerts
28
6. Technical data
29
7. Explanation of symbol
30
8. Waste disposal
30
9 Marking
30
10. Storage and cleaning
30
1. Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before
operating the data logger please read this manual carefully. You will
get useful information for understanding all functions.
2. Kindly note
• Check if the contents of the package are undamaged and complete.
• Remove the protection foil above the display.
• For cleaning the instrument please do not use an abrasive cleaner
only a dry or moist piece of soft cloth. Do not allow any liquid into
the interior of the device.
• Please store the measuring instrument in a dry and clean place.
• Avoid any force like shocks or pressure to the instrument.
• No responsibility is taken for irregular or incomplete measuring
values and their results, the liability for subsequent damages is
excluded!
3. Delivery contents
• Data logger
• Wall holder
• Battery 3,6 Volt (already inserted)
• USB protection cap
• 2x screws and dowels
4. Equipment and usage
LOG200/LOG210/LOG220 series logger are suitable for recording,
alarm tracking and displaying of temperature, humidity*, dew point
temperature* and barometric** (*only LOG210/220,** only LOG220)
measurements. Areas of application include the monitoring of
storage and transport conditions or other temperature, moisture
and / or pressure-sensitive processes. The logger has a built-in
USB port and can be connected without cables to all Windows
PCs. The USB port is protected by a plastic cap. Beside the actual
measurement result, the display shows
MIN- MAX- and AVG-measurements of each measurement channel.
