23
22
5.2.1.1 Power-Save Mode for Display
The Power-Save Modes is activated as a standard. The display
switches off when for 2 minutes no button has been pressed or the
instrument has been not moved. The logger is still active, only the
display is switched off. The internal clock runs.
5.2.2 Windows Software for Log200-Series
The instruments of series Log200 are already preset and ready
for start. It can be used without any software! However, there is a
Windows Application free for downloading.
Please note the free-to-use link:
5.2.2.1 Configuration Software Log Connect
By this software the user can change configuration parameter like
measuring interval, start delay(or other start parameter), creating
alarm levels or changing the internal clock time The Software Log
Connect contains an online help.
Download via: http://download.dostmann-service.de,
select Downloads/Software/5005-0200_LOG200/Software/
5.3 First start / start recording
Press button for 2 seconds, beeper sounds for
1 second, the actual date and time will be
displayed for 2 further seconds.
LED lights green for 2 sconds - logging has
started!
LED blinks green every 30 sec.
Display in Auto-Mode (Display shows all measurement channel in
a 3 seconds sequence)
By using the Software LogConnect, the presets can easily be
changed.
* LogConnect download link to access the software
http://download.dostmann-service.de , select Downloads/Software/
5005-0200_LOG200/Software/ or: www.dostmann-electronic.de - Down-
loads - Software - 5005-0200_LOG200 Software (download LogConnect)
5.3.1 Restart recording
See 5.3. First start / start recording. The logger is started by default
by button and stopped by USB port plug-in. The measured values
are plotted automatically to the PDF file.
NOTE:
When you restart the existing PDF file is overwritten.
Important! Always save the generated PDF files to your PC.
If LogConnect is open when connecting the loggers the log results
are copied to a backup location immediately by default.
LOG 200
LOG 210
LOG 220
