19
18
Index
1.
Introduction
19
2.
Kindly note / Safety Instructions
19
3.
Delivery contents
19
4.
Equipment and usage
19
5.
How to use device
5.1
Device description
20
5.2
Device start-up
21
5.2.1 Factory settings
21
5.2.1.1 Power-Save Mode for Display
22
5.2.2 Windows Software for LOG200-Serie
22
5.2.2.1 Configuration Software Log Connect
22
5.3
First start / start recording
22
5.3.1 Restart recording
23
5.3.2 Display used memory (%), date and time
24
5.4
Stop recording / create PDF
24
5.4.1 Stop recording by button
24
5.5
Description of PDF result file (Fig. C)
25
5.6 USB-Connection
25
5.7
Display Modes and Mode - Button: EXT, AVG, MIN, MAX 26
5.7.1 Special function of Mode-Button
27
5.7.1.1. Set marker
27
5.7.1.2 Reset Max-Min buffer
27
5.8
Battery replacement / Battery status indication
27
5.8.1 Set Date and Time after battery replacement via button 28
5.9 Alerts
28
6.
Technical data
6.1 Risk of injury 29
7.
Explanation of symbol
30
8.
Waste disposal
30
9
Marking
30
10.
Storage and cleaning
30
1. Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before operating the
data logger please read this manual carefully. You will get useful information for
understanding all functions.
2. Kindly note / Safety Instructions
• Check if the contents of the package are undamaged and complete.
• Remove the protection foil above the display.
• For cleaning the instrument please do not use an abrasive cleaner only a dry or
moist piece of soft cloth. Do not allow any liquid into the interior of the device.
• Please store the measuring instrument in a dry and clean place.
• Avoid any force like shocks or pressure to the instrument.
• No responsibility is taken for irregular or incomplete measuring values and their
results, the liability for subsequent damages is excluded!
•
Do not use the device in explosive areas. Danger of death!
•
Do not use the device in an environment hotter than 85°C!
The lithium battery may explode!
•
Do not expose the unsit to microwave radiantion. The lithium battery may explode!
3. Delivery contents
• Data logger
• Wall holder
4. Equipment and usage
LOG200/LOG210/LOG220 series logger are suitable for recording, alarm
tracking and displaying of temperature, humidity*, dew point temperature*,
barometric** and CO
2
*** (*only LOG210/220,** only LOG220, *** only LOG220 E)
measurements. LOG200 TC and LOG210 TC feature 2 external inputs for thermocouples.
LOG200 E and LOG220 E feature one external input for temperature or
CO
2
+Humidity probes (LOG220 E only). Areas of application include the monitoring
of storage and transport conditions or other temperature, moisture and / or
pressure-sensitive processes. LOG210 TC additionally supports wall mould
detection. The logger has a built-in USB port and can be connected without cables
to all Windows PCs, Apple computers or tablets (USB adapter might be required).
The USB port is protected by a plastic cap. Beside the actual measurement result,
the display shows MIN- MAX- and AVG-measurements of each measurement
• Battery 3,6 Volt (already inserted)
• USB protective cap, 2 x thermocouple type K (only TC)
• 2x screws and dowels
