background image

1. Important Notices: Proper Usage and Battery Care

!!

When using USB cable and adapter be careful with the direction of connector 
insertion If it is inserted incorrectly it may cause a problem with the PDA or PC. 
Ensure the cable used is in good condition not having bent pins or damaged areas 
along the cord.

Turn off the power of the product in places where use of the product is prohibited. 
Especially where radio wave interference may occur such as in an

 

airplane or in a 

hospital. Electromagnetic waves generated by the product not harmful to a human 
body may cause problems for electronic flight equipment or medical instruments.

The product may not operate properly in extreme cold or heat. The proper 
operating temperature is between -10℃

 

~ 50℃. Be especially careful to avoid 

storing the product in a place in extreme temperatures, or moist areas. This may 
cause external change or product damage. Store in a cool dry place. 

In following cases, warranty service will not be provided and repairs may be 
impossible:

-

 

If the product has been disassembled or remodeled by the user;

-

 

If the product has fallen into the water or stored in a moist place for

a long period of time;

-

 

If the product has been dropped from a high place or received 

excessive external shock.

Charge the battery fully for at least 30 minutes or longer before using the product 
for the first time. The product may not turn on before the battery is charged.

There is a risk of explosion if the battery installed is of the incorrect type. When 
replacing the battery be sure to check that you are using the correct one. Dispose 
of used batteries according to the instructions.

If battery not provided by the manufacturer are used, there is risk of product failure 
or explosion. Keep the battery away from children or pets to prevent them from 
biting or sucking the battery. Be careful to prevent metal objects from contacting 
the charging terminals of the battery as it may cause fire.

Summary of Contents for DOTH-500



























Reviews: