Using the display clip
The clip allows you to attach the display firmly to thin
material.
Note: Never slide thick materials into the clip opening
as it may strain and damage the clip.
1. To attach the clip to a desired area, gently lift the
clip lever to open the clip mouth.
2. Slide the material you wish to attach to the clip
between the upper and lower portions of the clip
mouth. Push the clip lever back down to tighten
and secure the clip.
Using the display watchband
The display comes with a watchband that allows you
to wear the display on your wrist.
1. Remove the display from the clip by twisting the
display counter clockwise and lifting up.
2. Place the display in the band cradle, with the
logo facing the nine o’clock position. Make sure
the display is firmly seated into the cradle evenly.
3. Twist the display into the watchband cradle
clockwise until the two lines along the side of the
display line up and it “locks” into position.
How to Use Your Display
(continued)
7
exerspy display
TM
