2
RECEIVING & INSTALLATION
Please read this manual in its entirety before
operating your press.
UNPACKING
Remember to save all packing materials - including any crating, boxes,
liners and boards. You may need these for shipping your machine or should
a repair be necessary in the future.
INSPECTION
Inspect your machine for hidden shipping damage. Contact the delivery
company immediately, should you find damage.
INSTALLATION
1. Lift the warmer from the box and place on cart, if you purchased one.
2. If the warmer is to be placed on counter top be sure to allow a
minimum clearance of two inches between adjacent equipment and/
or walls.
NOTE:
Be sure to allow ample space around grill for working and/or
traffic.
3. Clean the surface of the warmer with a mild soap and wipe clean with
cold water and sponge.
4. Plug the warmer into a proper three prong wall outlet. If other
appliances are connected to the same circuit make sure the total
load does not exceed maximum capacity of the circuit.
WARNING:
Do not use an extension cord to supply power to your press.
NOTE
: This symbol represents “Hot Surfaces”
