3
OPERATION
CLEANING
CLEANING ALUMINUM UNCOATED HEAT PLATEN(S).
1. Unplug the warmer and allow it to cool.
2. Dampen a nonmetallic scrubbing sponge with a mild soap or detergent
to remove any excess material from the heat platen.
3. Wipe clean with a dry cloth.
CLEANING PTFE COATED PLATEN(S)
(Optional Feature).
1. Unplug the warmer and allow it to cool.
2. Clean the PTFE coated platen with a mild soap and warm water ap-
plied with a soft cloth or sponge. Do not use steel wool, scrub sponges,
kitchen or oven cleaners or any other kind of abrasive material. This
will damage the coating.
3. Wipe clean with a dry cloth.
CLEANING OUTSIDE SURFACES OF THE MACHINE
• Use a mild soap and warm water applied with a soft cloth or sponge.
Do not use steel wool, scrub sponges, kitchen or oven cleaners or other
abrasives that will damage the painted surface.
OPERATING YOUR WARMER
Plug your warmer into a 120V power receptacle and the unit will start heating
up automatically. The warmer has a fixed temperature of 175°F. Allow at
least 15-20 minutes for surface to preheat. When finished unplug the unit
from the wall receptacle and the unit will start cooling down
WARNING:
DO NOT
touch hot surfaces.
WARNING:
Before cleaning, performing maintenance or repairs make sure
the machine is unplugged. This appliance is not waterproof.
Never spray or pour water or any other cleaning solution onto
this appliance.
