Lit. No. B64093, Rev. 09
49
April 15, 2011
7. Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain
in compliance with axle ratings and ratios as
speci
fi
ed by the vehicle manufacturer. If ballast is
required, it is important that it be secured properly
behind the rear axle. A ballast retainer kit is
available from your BLIZZARD outlet, PN 62849.
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your BLIZZARD
outlet for the correct amount of ballast required.
Include the weight of the retainer as part of the
ballast requirement. Sand bags are recommended
for use as ballast.
NOTE: Ballast recommended and its weight
calculations assume the entire width of the bed is
fi
lled as close to tailgate as possible.
5. This adjustable bracket mounts easily to your
straight blade joystick control and installs quickly
onto any door panel. Ideal for left-hand joystick
operation or for vehicles with center consoles. The
window mount bracket is shipped complete with
hardware. Some assembly required.
6. Putting your snowplow away for the winter? Have
a deep scratch to cover? Clean up your blade
and snowplow parts with our gloss spray paints.
BLIZZARD
®
touch-up paint provides an excellent
fi
nish to help keep your snowplow looking its best.
Paint provided in 12-oz spray cans.
ACCESSORIES & KITS — ALL MODELS
Passenger-Side
Ballast Retainer
Driver-Side
Ballast Retainer
